To be informed when new Sumitomo (SHI) Demag videos are available, please subscribe to our site on youtube.com at the following link: youtube.com/SSDinNA. Just use the Subscribe button at the top next to our site name.
SL Screw Assembly Detailed Technical Presentation
The Principle: The GS loading system precisely meters the resin into the barrel by synchronizing with the speed of the screw. The 14:1 L/D screw, which is designed with no compression zone, achieves a first-in/first-out, even movement of the resin through the barrel. Finally, a positive-locking non-return valve blocks backflow and eliminates inconsistencies associated with a conventional check ring.
The Result: A homogeneous melt and stable process are maintained, and uncontrolled shear heating, material stagnation/degradation, random short shots and black spots are virtually eliminated. Additionally, barrel wear, carbonization and maintence requirements are reduced. Working together with Sumitomo (SHI) Demag's Z-Molding capabilities for consistent and complete low-pressure filling and effective venting of gases, the industry's highest level of shot-to-shot repeatability and defect-free parts is achieved.
Applications: Medical, optical, connector and other high-precision parts requiring zero-defect molding.
The SL Screw Assembly is available on Sumitomo (SHI) Demag SE-DUZ, SE-EV and SR-Z all-electric machines for parts sized from fractional grams up to 244 grams (8.7 oz).
SE50EV All-Electric with SL Screw: Lens Molding
Sumitomo (SHI) Demag SE-EV all-electric injection molding machine equipped with the SL (Spiral Logic) Screw Assembly running an 8-cavity mold for a 0.003g lens for a mobile phone (shot weight 1.7 g).
SE50EV All-Electric with SL Screw: PPS Molding
Sumitomo (SHI) Demag SE50EV all-electric injection molding machine molding a PPS (polyphenylene sulfide) joint weighing 22.6 grams. The machine is equipped with the SL (Spiral Logic) Screw Assembly.
SE130EV-HD All-Electric Injection Over-molding Demonstration
Sumitomo (SHI) Demag SE130EV-HD (High Duty) all-electric injection molding machine demonstrating over-molding of an automotive steering component using PA6 resin on a metal tube. The shot weight is 200 grams and the mold would typically be run in a 220 ton machine. A 45 mm SL (Spiral Logic) Screw Assembly is used in this demo.
SR50Z All-Electric Vertical Injection Molding Machine Intrusion Molding Demo
A Sumitomo (SHI) Demag SR50Z all-electric vertical injection molding machine with a rotary table demonstrates intrusion molding of 8-cavity PBT insulator housing. The machine is equipped with an SL (Spiral Logic) Screw Assembly and a special intrusion system. The shot size is 66.7 grams.
Medical Micromolding Demonstration on an SE50DUZ All-Electric with SL Screw Assembly
Medical micromolding demonstration on a Sumitomo (SHI) Demag SE50DUZ all-electric injection molding machine with 25 mm SL (Spiral Logic) Screw Assembly. Injection molded part is an Ultem 0.0772 g barb stop used in US Endoscopy's iSnareŽ System. Mold, process and sample parts in glass case: Sansyu FineTool, Ltd. and Makuta Technics, Inc.
Please use menu bar at left for additional information on Sumitomo (SHI) Demag's all-electric injection molding machines and the SL Screw Assembly.